Watch the video here: Beverley's Beautiful Mink Transformation
Beverly's Mink was made in the 1990's. It belonged to her mother. I love being able to take a loved one's beloved item and turn it into a family heirloom. The original lining was use, but the monogram was left out. A copper brown silk crepe was used on two of the outside panels on the lining. Final Measurements: Throw: 52 by 54 Pillow: 14 X 14 with pillow and zipper installed.
Watch MJ’s Mink Transformation here: MJ's Video
The customer wanted to make a throw and a teddy bear from her mink coat. The coat had both sheared and unsheared fur. The unsheared fur was used in both the bear and the throw's border. The total measurement for this throw was 43 by 47 and the bear is 12 inches tall. Bear Pattern used: Funky Friends Factory ~ Melody Memory Bear Lots of cute animal patterns there. Go check them out! https://www.funkyfriendsfactory.com
Watch the video here: Jana's Lynx Coat
What do you do when you want a nice size throw and your coat is too small/short? Coat made only a 35 by 50 throw. Way too small during a cold winter’s night. The customer and I decided to go with a faux fur that was close in color to the Lynx coat.
We used faux fur as a border and it came out great!
Finished project size 50 by 63.
See the video here: Anne's Throw & Pillow
Beautiful Mink Coat transformed into a throw & pillow. Lovely embroidered coat lining used as the backing. Final Measurement 47 by 50 for the throw and 16 by 16 pillow. View Part II on tackling the intricate backing.
Watch the video here: Michele's full length tanuki coat transformation
This project consisted of a full length tanuki coat To be transformed into a throw and a pillow. The fur was in excellent condition. The fur was very thick and must have been super warm in its heyday. It also accompanied a headband, as told by the customer that she used to wear it mainly in the 80s.
The final measurement of the coat was 56 by 58. The pillow measured 16 by 16. The customer chose to use her lining for the back of the pillow as well as maintaining her monogram. She used a pre quilted backing for the throw.
Full length Mink Coat transformed into a throw and pillow.
Focus of this video: Working around the arm holes.
Final measurement of throw: 48by50 Pillow size 16 by 16
Watch the video here: Sable Coat Transformation
Debbie's coat was in excellent condition.!!! The fur was soft and supple and easy to work with. She chose to use her lining. The lining was beautifully embroidered with wonderful detail. For this particular coat I chose to have the fur all running in the same direction. The lining was highlighted with a beautiful rose quilting pattern. The border around the original backing was a contrasting brown color, that picked up the colors of the embroidery. The final dimensions of the throw was 52 inches by 53 inches.
Watch the video here: Marsha's Beaver Coat Transformation
Beaver Coat Transformed into a Throw (48 by 53) a & Pillow (18 by 18). Coat was in excellent condition. 3 inch border using graduated light to dark tones. Customer's lining was used as a backing for the pillow. Original monogram was cut out and saved for the customer, as directed.
Watch Brooke's Fur Transformation here!
Brooke's Lovely Mink Coat Transformed into a Throw & Teddy Bear It was such an honor to make this beautiful Mink Throw & Teddy Bear. The completed throw measures 48 inches wide by 50 inches long. The customer chose to keep her lining, as well as her monogram. With the remaining mink scraps Brooke opted to make a Memory Teddy Bear. We used the button from the coat and made the bear’s nose. The lining was also used on the paw pads and inner ears.
Teddy Bear Pattern: https://www.funkyfriendsfactory.com/melody-memory-bear-keepsake-toy-sewing-pattern
You can watch the video here: Fur Teddy Bear and Bunny
I was contacted by a customer who wanted to turn their deceased wife's mink coats into teddy bears for his grandchildren. He had a particular style of bear in mind, but he wanted them all to look a bit different. The pattern that was used was the same for each of the bears, but their look is completely different. The pattern that I used was named Sebastian, and will make a 15 inches fully jointed traditional teddy bear. They even have a small pattern for a shirt collar. Although the pattern is designed for mohair I was able to use it for real fur. My final project measured approximately 14 inches due to the bulk of the real fur seams. You can purchase this pattern here: https://www.etsy.com/se-en/listing/164872932/pdf-teddy-bear-pattern-sebastian-15
The fox trim was used in the belly area as well as the shaved down brown parts of the face and ears.
The Bunny pattern is quite cute. It is a traditional plush animal with non movable joints. Measures about 9 nines high.. The pattern can be purchased here: https://www.etsy.com/listing/1384893435/adorable-bunny-rabbit-plush-diy-pattern?ref=yr_purchases.
View the video here: Karen's Mink Coat Transformation
It was such an honor to make this beautiful Mink Throw & Cowl!! This coat belonged to the customer’s mother. We were hoping that the project could have been completed before her mom passed, but unfortunately that didn't happen. I did my absolute best to honor Karen’s mother's memory. The completed throw measures 45 inches wide by 52 inches long. The throw is lined with wool batting. The customer chose to keep her mother's lining, as well as her monogram. With the remaining mink scraps Karen opted to make a Cowl to keep her nice and warm in the winter. We were able to line both sides with fur, which I was kind of doubtful in the beginning. I can’t believe that we had enough. The Cowell measures 36 inches long and has a keyhole opening so the one end of the scarf can be tucked into the center of scarf.
Watch the video here: Beautiful Beaver Coat Transformed into a Throw
Beaver Coat transformed into a throw. The fur was in amazing condition! So nice to work with. I loved the lining in this fur. The color variation was very unique.
Final measurements: 42 by 57
See the video here: Carol's 20 by 60 Bolster and Pompoms
This beautiful brown mink jacket was transformed into a 20 by 60 bolster. It is absolutely stunning! It will be used on her bed. The customer chose to use the lining of her coat as the backing of her bolster. The embroidery on the lining is so lovely and soft looking. It turned out beautiful! She also asked if I could make her six pom poms. The customer is a knitter. She's going to use those pom poms on the tops of the hats that she creates!! An amazing way to repurpose a fur.
See video here: Virginia's Mink & Seal Throws
The customer sent in two beautiful fur coats. She wanted to make a two throws.
The Brown Mink was in rough shape and needed a support material on the side of the throw. It was torn, was repaired multiple times prior. The original lining from the brown mink and monogram was used.
The Black Seal was in great condition and was so soft to the touch.
Final throw measurements:
Black Seal Throw- 44 by 50
Brown Mink Throw - 46 by 57
18 by 18 Pillows made from the leftover fur from both projects.
See Video Here: Denise's Fur Transformation
Denise sent in a beautiful black mink coat. The coat was well made and was in excellent condition. She wanted to make a throw as well as two bolster pillows. The bolster pillows were made from the sleeves. The original lining and monogram was used for the backing.
Final throw measurement: 44 by 52.
Final measurement for Bolster pillows: 6 inches in diameter and 18 inches in length.
Watch the video here: Pam's Mink Coat Transformation
Pam’s fur coat was wonderful to work with! Well maintained and so soft too. She wanted to use her own lining from her fur coat. Watch how I make the lining here: How I Make My Custom Linings
Watch the video here: Five Beautiful Repurposed Furs Coats
The customer sent me 5 fur coats that belonged to her grandmother. Each one of the coats will be transformed into a throw and given to different family members. There were four minks and one rabbit coat. The biggest challenge was trying to remove a very bad musty odor from the furs. I am so happy that I could create these wonderful family heirlooms.
See the video here: Mary's Mink Transformation
Mary's Knee length mink coat was just simply lovely. Mary wanted her mink coat to be transformed into a throw. The coat itself was in wonderful condition and the construction of the coat was stellar. The final size of the throw was 45.5 by 49 inches.
See the video here: Beaver Coat to a Beaver Throw
The customer wanted her Beaver coat transformed into a throw. The fur was in wonderful condition. It had a lovely fox collar, but the collar was very small and short. It would have been very difficult to incorporate it in the border of the throw, so we opted not to use it. It measures 45 by 55.
